- -30%
UM-1D portable digital thickness gauge handheld ultrasonic thickness meter
Referentie:
€ 703,00
€ 492,10
30% korting
Inclusief belasting
100% veilig bestellen met behulp van SSL Encryptie.
Producten die op voorraad zijn worden binnen 5 werkdagen geleverd
Binnen 30 dagen kosteloos retourneren
Productbeschrijving
Main features:
Resolution： 0.1mm or 0.001 inches resolution
Measuring range: 0.8-300mm
128×64 pixels display with back light
500 thickness readings can be stored
Hi-Low alarm setting
Minimum thickness capture
V-sound path correction
Through paint/coatings(UM-1D)
We developed first through paint/coating ultrasonic thickness gauge of Chinese make in 2006. UM-1D has the ability to measure through and eliminate the thickness of paint or coatings on the surface of measured material.
In normal measurement mode, the time interval-T1 is between transmitted pulse and first back wall echo(coating thickness is included ). In through paint/coatings measurement mode, the time interval-T2 is between two successive back wall echoes( coating thickness is excluded)
UM series are extremely suitable for measuring pipes after corrosion.
Each gauge is calibrated non-linearly with 34 standard test blocks before delivery to ensure measurement correctness.
Um-view software
Selectable USB and RS232 communication port&software
Resolution： 0.1mm or 0.001 inches resolution
Measuring range: 0.8-300mm
128×64 pixels display with back light
500 thickness readings can be stored
Hi-Low alarm setting
Minimum thickness capture
V-sound path correction
Through paint/coatings(UM-1D)
We developed first through paint/coating ultrasonic thickness gauge of Chinese make in 2006. UM-1D has the ability to measure through and eliminate the thickness of paint or coatings on the surface of measured material.
In normal measurement mode, the time interval-T1 is between transmitted pulse and first back wall echo(coating thickness is included ). In through paint/coatings measurement mode, the time interval-T2 is between two successive back wall echoes( coating thickness is excluded)
UM series are extremely suitable for measuring pipes after corrosion.
Each gauge is calibrated non-linearly with 34 standard test blocks before delivery to ensure measurement correctness.
Um-view software
Selectable USB and RS232 communication port&software