- -32%
SOMMER CABLE Combi Cable 1x2x0,25+3G1,5 SC-Monolith Power DMX 10
Referentie:
€ 631,60
€ 429,49
32% korting
Inclusief belasting
100% veilig bestellen met behulp van SSL Encryptie.
Producten die op voorraad zijn worden binnen 5 werkdagen geleverd
Binnen 30 dagen kosteloos retourneren
Productbeschrijving
When the lights begin to dance...
the people stare in wonder! But there is quite a bit of technology behind it. And cables do not play the least important part here. The power for the spotlights and the control signals for their movements must be transmitted via cables. Both cables are combined in a robust cable hose, providing the input lead for the lighting desk and other DMX 512-equipped control devices.
The SC-Monolith 1 POWER/DMX consists of a 3 x 1.5 mm² power cable and one DMX 512 line. Each DMX wire pair is shielded by a tinned helical copper mesh. The power cable was developed in compliance with VDE and has its own jacket for extra safety.
Of course the AES/EBU cable can also be used as a microphone cable or as a feed line for active loudspeaker systems.
Parallel control for lighting boards through one cable via power line and DMX signal
Very flexible and enormously tread-resistant due to the round jacket made of cotton and viscose
Very good pairwise shielding of the DMX lines due to tinned helical copper mesh screen or copper braiding
Control line for DMX lighting consoles (wave impedance of 110 ohms)
Analogue + digital audio multipair with power supply
Made in Germany
Jacket
PVC
Shielding factor
90 %
Temperature range
min. -30° C
Temperature range
max. 70° C
Weight per 1 m
200 g
Surge impedance (data):
110 ohms (±5 %)
the people stare in wonder! But there is quite a bit of technology behind it. And cables do not play the least important part here. The power for the spotlights and the control signals for their movements must be transmitted via cables. Both cables are combined in a robust cable hose, providing the input lead for the lighting desk and other DMX 512-equipped control devices.
The SC-Monolith 1 POWER/DMX consists of a 3 x 1.5 mm² power cable and one DMX 512 line. Each DMX wire pair is shielded by a tinned helical copper mesh. The power cable was developed in compliance with VDE and has its own jacket for extra safety.
Of course the AES/EBU cable can also be used as a microphone cable or as a feed line for active loudspeaker systems.
High quality power DMX cable
Parallel control for lighting boards through one cable via power line and DMX signal
Very flexible and enormously tread-resistant due to the round jacket made of cotton and viscose
Very good pairwise shielding of the DMX lines due to tinned helical copper mesh screen or copper braiding
Control line for DMX lighting consoles (wave impedance of 110 ohms)
Analogue + digital audio multipair with power supply
Made in Germany
Jacket
PVC
Shielding factor
90 %
Temperature range
min. -30° C
Temperature range
max. 70° C
Weight per 1 m
200 g
Surge impedance (data):
110 ohms (±5 %)