- -32%
SPD Raycap Strikesorb 30-B-DRM overspanning en bliksembeveiliging
Referentie:
€ 250,00
€ 170,00
32% korting
Inclusief belasting
100% veilig bestellen met behulp van SSL Encryptie.
Producten die op voorraad zijn worden binnen 5 werkdagen geleverd
Binnen 30 dagen kosteloos retourneren
Productbeschrijving
Raycap Strikesorb 30-B-DRM
Finally, an SPD (Surge Protection Device) you don’t have to replace.
For single phase 230 AC volt lines :
Order 2 pieces DRM30 for complete protection.
For 3 phase 380 Volt AC lines : Order 4 pieces DRM30 for complete protection
Strikesorb 30-DRM modules protect mission-critical applications from successive overvoltage events. They are capable of absorbing and dissipating the energy of multiple electrical surges without degradation. The product integrates into most systems, fitting easily through its DIN Rail mount feature.
Capable of absorbing and dissipating the energy of multiple electrical surges without failure or degradation, the Strikesorb 30DRM integrates into most systems, fitting easily through its DIN Rail mount feature.
Only Raycap’s Strikesorb Surge Protective Device (SPD) technology can provide uninterrupted protection from damaging overvoltages. Strikesorb 30-DRM modules are designed to absorb and dissipate the excess energy of repetitive power surges without performance deterioration.
Class II rating per IEC 61643-11
Innovative design: direct connection, no fuses, environmentally-sealed SPD
Fully recognized to UL 1449 4th edition
Compliance to IEC 61643-11
Nominal Discharge Current per UL 1449 4th edition and IEC 61643-11, 20kA
Maximum Surge Current (8/20µs) per NEMA LS-1, 60kA
Available in a variety of operating voltages
Finally, an SPD (Surge Protection Device) you don’t have to replace.
For single phase 230 AC volt lines :
Order 2 pieces DRM30 for complete protection.
For 3 phase 380 Volt AC lines : Order 4 pieces DRM30 for complete protection
Strikesorb 30-DRM modules protect mission-critical applications from successive overvoltage events. They are capable of absorbing and dissipating the energy of multiple electrical surges without degradation. The product integrates into most systems, fitting easily through its DIN Rail mount feature.
Capable of absorbing and dissipating the energy of multiple electrical surges without failure or degradation, the Strikesorb 30DRM integrates into most systems, fitting easily through its DIN Rail mount feature.
Only Raycap’s Strikesorb Surge Protective Device (SPD) technology can provide uninterrupted protection from damaging overvoltages. Strikesorb 30-DRM modules are designed to absorb and dissipate the excess energy of repetitive power surges without performance deterioration.
Class II rating per IEC 61643-11
Innovative design: direct connection, no fuses, environmentally-sealed SPD
Fully recognized to UL 1449 4th edition
Compliance to IEC 61643-11
Nominal Discharge Current per UL 1449 4th edition and IEC 61643-11, 20kA
Maximum Surge Current (8/20µs) per NEMA LS-1, 60kA
Available in a variety of operating voltages